Heavy Duty Drill Screw - 190mm
190mm long, Carbon Steel, sheet to Steel Self drilling screw with 19mm bonded washer. - Sold in Bags of 100no - (CODE: FD1HD190W19)
Widely used when installing single skin box profile steel sheets to heavy steel (angle iron / RSJ's) up to 12mm thick. Designed to be fixed through the valley (low part) of the cladding profile. The self tapping screw will drill it's own hole through up to 0.7mm thick steel sheeting and then into hot rolled purlins - No need to pre-drill.
The 19mm bonded galvanised washer gives a watertight fixing point through the valley and ensures the strongest possible fastening to the steel supports beneath. (Fixing through the crown of the sheet should be avoided where possible as this can often cause the crown to dent if over tightened, it can also allow for more movement at the fixing point).
- 190mm long x 5.5mm diameter self tapping screw
- Ideal For use with 120mm+ core insulated panel
- 18mm of cutting tip to self drill through up to 12mm thick steel
- High Thread detail incorporates a course thread just under the head that is larger diameter to the rest of the screw. This extra thread stitches the top sheet under the washer of the fastener and gives resistance to the sheet pulling away from the washer.
- 8mm (5/16) hex head. 8mm magnetic drill socket also available
- Comes complete with 19mm diameter bonded galvanised washer. 19mm colour screw caps to suit cladding colour also available
For fixing box profile roof lights you will require a 29mm washer and 29mm screw cap
When using drillscrews to fix corrugated profile sheets you would need to fix through the crown of the corrugation and use in conjunction with a M8 Seala washer and Deep Cover Seala Cap.