Heavy Duty Drill Screw - 38mm

£15.40

Price does not include VAT or Shipping.
This will be calculated on checkout. More Details

38mm long, Carbon Steel, sheet to Steel Self drilling screw with 19mm bonded washer. - Sold in Bags of 100no - (CODE: FD1HD38W19)

Widely used when installing single skin box profile steel sheets to heavy steel (angle iron / RSJ's) up to 12mm thick.  Designed to be fixed through the valley (low part) of the cladding profile.  The self tapping screw will drill it's own hole through up to 0.7mm thick steel sheeting and then into hot rolled purlins - No need to pre-drill.

The 19mm bonded galvanised washer gives a watertight fixing point through the valley and ensures the strongest possible fastening to the steel supports beneath.  (Fixing through the crown of the sheet should be avoided where possible as this can often cause the crown to dent if over tightened, it can also allow for more movement at the fixing point).

 

  • 38mm long x 5.5mm diameter self tapping screw
  • 20mm thread and 18mm of cutting tip to self drill through up to 12mm thick steel
  • 8mm (5/16) hex head. 8mm magnetic drill socket also available
  • Comes complete with 19mm diameter bonded galvanised washer.  19mm colour screw caps to suit cladding colour also available

For fixing box profile roof lights you will require a 29mm washer and 29mm screw cap

When using drillscrews to fix corrugated profile sheets you would need to fix through the crown of the corrugation and use in conjunction with a M8 Seala washer and Deep Cover Seala Cap. 

Related products